Wednesday, February 20, 2019

Enphase 7IQ Massive Upgrade -- Special Pricing


Old Micro-Inverters Failing!  Replace Them All Now at Less Than Manufacturer's Cost for 7th Generation 7 IQ Microinverters.

Interested?  Enquire by Email Here 2019@pacific-energy.com
7IQ Upgrade – (4) Bullet Points to Understand it – It’s a complete component rebuild on the roof.
  1. Early Microinverters Have a High Rate of Failure, And a high labor and programming cost to repair.  Upgrading the whole system will be cheaper than paying the repair costs over time.
  2. Enphase is offering to Upgrade to 7th Generation Micros at LOW COST
  3. Enphase throws in free cables, and a free better quality Envoy/EMU monitor with wireless capability.
  4. Your warranty, which is going away quickly, is EXTENDED for 25 years…..starting 2019!!!
Let’s say you had a $35,000 car, and you had 70,000 miles on it and it was started cost you a bunch in repairs.    If the dealer came to you and said, heh, for $4000, we will give you a new car, with a 25 year warranty……WOULD YOU TAKE THAT DEAL?

REALLY? IT GETS BETTER!?

5) The 7IQ is "Battery Ready", The M190 will never be Battery Ready.   Call Steve to discuss, battery costs and quality and longevity have taken huge strides forward.    And Enphase will be rolling out their "Plug and Play" battery system, that will "play nice" but only with the new 7IQ Inverters!
6) The new monitor (EMU/Envoy) comes with Current Transducers, that PES et al, can install for you if you want.    These provide valuable information on your actual power production, and times where you import energy from HECO.   This allows a good engineer to properly size a battery system, without buying too much!   

The 7IQ Upgrade program is like getting that NEW CAR, at 10% of the cost!
Interested?  Enquire by Email Here 2019@pacific-energy.com

I have upgraded my system in Kunia, and there were a few bumps and learning curves, but overall, it is a great project, and I am ready to roll it out for all my customers, who have the old style Micros (M190, M210, M175).

If you have the M215 or M250, Enphase is NOT ALLOWING you this upgrade at this time.

If you don’t know what you have, just enquire 2019@pacific-energy.com
The original Enphase Microinverter warranty was 15 years.   For many people that is ½ or 2/3 gone ALREADY.

We re-use the same racking system, and the panel hold down clips.    We expect some stuff to break, as that is just the way Murphy works, and we will cover all miscellaneous small part breakage, up to $200 per customer.

Interested?  Enquire by Email Here 2019@pacific-energy.com

No comments:

Post a Comment